The true 7″ chipper – no other chipper in the market combines a 7″ diameter with a machine weight below 750 kg

About the TP 175 MOBILE

The height-adjustable ejector spout TP VARIO SPOUT enables you to blow wood chips in any direction required

Easily stored in a garage, workshop or container

Width and shape of the funnel gives good visibility and a very easy operation

Total weight below 750 kg – only a standard driving licence is required

The true 7″ chipper – no other chipper in the market combines a 7″ diameter with a machine weight below 750 kg

The automatic clutch system TP STARTER and stress control system with hour counter TP PILOT are standard

Covered by a 3 YEAR WARRANTY

Key Features

Hydraulic system: Integrated

Operation: Horizontal funnel with yellow safety bar for forward/return/stop of feed rollers

Tip up funnel: Yes

Infeed opening, height: 175 mm

Infeed opening, width: 191 mm

Funnel opening, height (inside measure): 746 mm

Funnel opening, width (inside measure): 926 mm

Infeed position: Parallel to driving direction

Feed rollers: 2

Feed roller position: Horizontal

Feed roller diameter: 180 mm

Feed roller pretension: 1 spring 8 mm

Feed roller drive: 2 x hydraulic in series

Hydraulic oil capacity: 15 litres

Infeed speed (maximum): 20 m/min

Hydraulic pump: Fixed gearwheel pump

Bio-degradable hydraulic oil: Optional

Chipping principle: Disc chipper

Chipping angle: 90 degrees



Number of blades/knives: 2

Cuts per round: 2

Blade/Knive gauge - minimum: 12 mm

Blade/Knive gauge - maximum: 12 mm

Rotor speed: 1650 rpm

Rotor diameter: 599 mm

Rotor weight: 69 kg

Transmission: Belt drive

Anvil/counter knife - horizontal: 1 reversible

Anvil/counter knife - vertical: 1

Replaceable tub plate: No

TP CHIP KIT: Optional

Tub plate: Yes

Make/Model: Kubota D1305-E4B

Power, gross: 25 hp

Engine speed: 2600 rpm

Power, gross (kW): 18,5 kW

Cooling type: Water

Fuel type: Diesel

Number of cylinders: 3

Tank size: 20 litres

Fuel consumption (average): 3 l/h

Hour meter: Yes

Clutch system: TP STARTER

Drawbar make: ALKO

Height adjustable drawbar: No

Axle make: ALKO

Number of axles: 1

Max. axle load (total): 750 kg

Overrunning brake system: Yes

Tyre size: 155/80/R13

Max speed: 100 km/h

Standard discharge spout: Turntable

Rotation of discharge spout: 270 degrees

Vertical extended spout 0,35m: No

Horizontal extended spout 1,0m: No

Horizontal extended spout 1,5m: No


Vertical extended spout 0,5m: No

No-stress control: TP PILOT

Displays feed roller rotations: Yes

Displays rotor rotations: Yes

Timer for work hours (can be reset): Yes

Timer for total work hours: Yes

Buy the TP 175 MOBILE today!

Enquire now