TP 215 MOBILE
THE STRONGEST INFEED IN THE MARKET: The unsurpassed infeed force is obtained in a combination two aggressive shark teeth feed rollers, two powerful springs and TP DUAL TORQUE INFEED™ ensuring maximum oil pressure and flow to each feed roller motor!
Covered by a 3 YEAR WARRANTY
TP DUAL TORQUE INFEED™
About the TP 215 MOBILE
THE STRONGEST INFEED IN THE MARKET: The unsurpassed infeed force is obtained in a combination two aggressive shark teeth feed rollers, two powerful springs and TP DUAL TORQUE INFEED™ ensuring maximum oil pressure and flow to each feed roller motor!
The patented automatic clutch system between engine and chipper giving less stress on the engine during start-up
High tech diesel engine with direct injection, easy cold start, high torque reserve and low fuel consumption
Many ways to customize: With fixed or height-adjustable ejector spout, with or without a turntable, single-axle or twin-axle trailer, fixed or height-adjustable drawbar.
With 3 YEAR TP WARRANTY
Key Features
Hydraulic system: Integrated
Operation: Foldable funnel with yellow safety bar (forward/return/stop of feed rollers)
Tip up funnel: Yes
Infeed opening, height: 216 mm
Infeed opening, width: 265 mm
Funnel opening, height (inside measure): 809 mm
Funnel opening, width (inside measure): 1176 mm
Infeed position: Parallel with driving direction (turntable optional)
Feed rollers: 2
Feed roller position: Horizontal
Feed roller diameter: 204 mm
Feed roller pretension: 2 springs 8 mm
Feed roller drive: xx
Hydraulic oil capacity: 25 litres
Infeed speed (maximum): 36,9 m/min
Hydraulic pump: xx
Bio-degradable hydraulic oil: Optional
Chipping principle: Disc chipper
Chipping angle: 90 degrees
TP OPTICUT: Yes
TP TWIN DISC: Yes
Number of blades/knives: 4
Cuts per round: 2
Blade/Knive gauge - minimum: 14 mm
Blade/Knive gauge - maximum: 14 mm
Rotor speed: 1320 rpm
Rotor diameter: 760 mm
Rotor weight: 140 kg
Transmission: Belt drive
Anvil/counter knife - horizontal: 1 turnable
Anvil/counter knife - vertical: 2
Replaceable tub plate: Yes
TP CHIP KIT: Optional
Tub plate: Yes
Drawbar make: ALKO
Height adjustable drawbar: Optional
Axle make: ALKO
Number of axles: 1
Max. axle load (total): 1500 kg
Overrunning brake system: Yes
Tyre size: 185/70 R13C
Max speed: 140 km/h
Chipping unit on turntable: Yes
Number of axles: 2
Drawbar make: ALKO
Height adjustable drawbar: Optional
Max. axle load (total): 2000 kg
Overrunning brake system: Yes
Tyre size: 195/50 R13C
Max speed: 100 km/h
Make/Model: Kohler/Lombardini KDI 2504 M
Power, gross: 49 hp
Engine speed: 2600 rpm
Power, gross (kW): 36 kW
Cooling type: Water
Fuel type: Diesel
Number of cylinders: 4
Tank size: 52 litres
Fuel consumption (average): 4 l/h
Hour meter: Yes
Clutch system: TP STARTER
Standard discharge spout: Turnable
Rotation of discharge spout: 270 degrees
TP VARIO SPOUT: Optional
No-stress control: TP PILOT
Displays feed roller rotations: Yes
Displays rotor rotations: Yes
Timer for work hours (can be reset): Yes
Timer for total work hours: Yes