TP 250 PTO

The large rotor disc with three blades combined with three counter steel, the 90-degree chopping angle and the two horizontal feed rollers are all involved in ensuring a very efficient wood chipping

About the TP 250 PTO

TP 250 PTO is a disc chipper with hydraulic infeed – efficient for clearing and chipping of branches and whole trees up to 250 mm in diameter

Fulfil the needs in many market segments, including forestry technicians and arborists

The large rotor disc with three blades combined with three counter steel, the 90-degree chopping angle and the two horizontal feed rollers are all involved in ensuring a very efficient wood chipping

The replaceable wearing plate in the rotor house keeps the maintenance costs down

Covered by a 3 YEAR WARRANTY

Key Features

Operation: Horizontal funnel with yellow safety bar for forward, return and stop of feed rollers

Infeed opening, height: 260 mm

Infeed opening, width: 350 mm

Funnel opening, height (inside measure): 736 mm

Funnel opening, width (inside measure): 1100 mm

Infeed position: Parallel to driving direction

Feed rollers: 2

Feed roller position: Horizontal

Feed roller diameter: 225 mm

Feed roller pretension: 2 springs 8 mm

Feed roller drive: 2 x hydraulic in parallel

Hydraulic oil capacity: 25 litres

Infeed speed (maximum): 39 m/min

Integrated hydraulic system: Yes

Hydraulic pump: Fixed gearwheel pump

Bio-degradable hydraulic oil: Optional

Chipping principle: Disc chipper

Chipping angle: 90 degrees

TP OPTICUT: No

TP TWIN DISC: Yes

Number of blades/knives: 3

Cuts per round: 3

Blade/Knive gauge - minimum: 13 mm

Blade/Knive gauge - maximum: 13 mm

Rotor speed: 1000 rpm

Rotor diameter: 960 mm

Rotor weight: 266 kg

Transmission: Direct

Anvil/counter knife - horizontal: 1 reversible (Hardox)

Anvil/counter knife - vertical: 2 (Hardox)

Replaceable tub plate: Yes

Sliver breakers: No

TP CHIP KIT: Optional

Tub plate: Yes

PTO 1000 rotations per minute: Yes

PTO 540 rotations per minute: No

3-point linkage: Cat. 2

PTO shaft: Included, with free-wheel and friction clutch

PTO rotations per minute: 1000 rpm

Hydraulic outlets: No DA

Front mounting - PTO 1000 rotations per minute: No

Standard discharge spout: Turnable

Rotation of discharge spout: 300 degrees

Vertical extended spout 0,35m: No

Extended spout 0,3m: No

Hinged discharge spout: Optional

Horizontal extended spout 1,0m: No

Horizontal extended spout 1,5m: Optional

Hydraulic turn of spout incl. Spout: No

Vertical extended spout 0,5m: Optional

Buy the TP 250 PTO today!

Enquire now